18 Sep 2002

1.3 JTD 16v Multijet the second generation of common rail turbodiesel engine

In 2003, Fiat Auto will be presenting a revolutionary engine destined to bring the benefits of common rail turbodiesel technology - better performance for lower fuel consumption and more respect for the environment - to more customers than ever before.

In 2003, Fiat Auto will be presenting a revolutionary engine destined to bring the benefits of common rail turbodiesel technology - better performance for lower fuel consumption and more respect for the environment - to more customers than ever before.

The new engine, known as the 1.3 JTD 16v, offers two highly innovative features: extremely compact dimensions that enable it to be fitted on small cars; and the sophisticated Multijet technology of second generation JTDs. The latter, in particular, is a result of the work of the Fiat Research Centre which was the first to develop the Unijet-type common rail principle (1997 saw the launch of the Alfa 156 JTD, the first car in the world to be fitted with the revolutionary 1.9 JTD 8v).

Since then, Fiat's research arm, in the wake of this far-reaching expertise, has continued to investigate the future potential of the common rail injection system and has developed a second generation of JTD engines, the Multijet and multivalve. The outcome is a supercompact engine (460 mm long, 500 mm wide and 650 mm high) with a capacity of just 1251 cubic centimetres but a 16 valve four cylinder in line structure that assures the car outstandingly comfort and great performance. The unit's highly flexible structure also means it will be possible to adapt it for different applications.

Above all, this state-of-the-art power unit is engineered to reduce fuel consumption by 10% and achieve lower noise levels. Emission levels will also drop by 30 to 40% and this is enough to bring the unit to within EURO IV limits.

These results highlight the great technological leap achieved by this new power unit generation. They are better than conventional prechamber diesel units, of course, but also improve on up-to-date Unijet turbodiesel engines with their sophisticated Multijet injection technology and electronic control unit.

The control unit increases the number of injections during each cycle to a level higher than the current number of two. In this way, the same amount of diesel is burnt inside the cylinder but split to achieve smoother combustion.

The 1.3 JTD 16v will be built by FIAT-GM Powertrain Polska in the Polish plant of Bielsko-Biala.


POWER UNIT ARCHITECTURE

The 1.3 JTD 16v Multijet is a 1251 cc four cylinder in-line power unit with a bore of 69.6 mm and a stroke of 82 mm. The four valves per cylinder are operated directly by a twin overhead camshaft system. Maximum power is 70 bhp for a torque of 170 Nm.

The new power unit features a chain-driven timing system with fingertip control, hydraulic tappets, a cast iron crankcase with an aluminium base and an aluminium cylinder head.

The cylinder head is also designed with highly efficient directional intake ports to ensure an optimum fuel mix despite the small bore. The 1.3 JTD engine is turbocharged by a turbocharger with wastegate and intercooler. A variable geometry version will also be available shortly.

Last but not least, the power unit features an electronically-controlled EGR system and an exhaust gas cooling device.


THE MULTIJET SYSTEM

The second-generation 1.3 JTD engine employs a Multijet system based on the common rail principle. This uses electronic injector control to carry out more injections than the current number of two during each engine cycle. In this way, the same amount of diesel is burnt inside the cylinder but in smaller parts to achieve smoother combustion.

The secret of the Multijet system lies in the design of the control unit and injectors designed to deliver a series of very closely spaced injections. Fiat Auto researchers developed this injection process to ensure more accurate control of pressures and temperatures inside the combustion chamber and more efficient use of air taken into the cylinders.

The Multijet is based on a very simple engineering principle. Present-day common rail engines already carry out a pre-injection or pilot injection to increase temperature and pressure in the cylinder for more gradual combustion and a quieter running engine.

The new system goes on to divide the main injection into smaller injections so we can achieve more ambitious goals: quieter combustion, reduced emissions and increased performance.

The system offers considerable benefits that can be applied to optimise different individual engine service strategies. In some cases, for example, the priority is to reduce start-up times and fume levels, in other cases it is to increase torque and reduce noise while in others it is to reduce emissions and ensure a quieter drive.


A RECORD SUCCESS

The new Multijet system has allowed the Fiat Group to achieve an important new record in the diesel engine field. All this was possible because we have been building up know-how in this field since 1986, the date that marked the arrival of the Croma TDI, the first direct injection diesel vehicle in the world. The Croma engine was an outstanding result for the time and the first major step toward automotive diesel engines with more efficient combustion.

The engineering, subsequently copied by other manufacturers, meant that diesel cars were able to ensure better performance coupled with lower fuel consumption. One problem remained: excessive engine noise at low rpms and during speed transitions.

This was the cue for the start of the Unijet story, i.e. the quest for a more advanced direct injection system that could drastically reduce the problem of excessive combustion noise. Some years later, this research strand brought us the Unijet itself and significant benefits in terms of efficiency and fuel consumption.

We reasoned that the problem could be resolved in one of two ways: we could be content with a passive system and simply insulate the engine to prevent sound waves from reaching the passenger compartment - or we could work actively to eliminate the problem at its source by developing an injection system that actually reduced combustion noise.

Fiat Group engineers went for the second option and immediately chose the common rail principle after considering and then rejecting other high-pressure injection systems.

The other systems do not allow pressure to be managed independently of rpm and engine load and neither do they include a pre-injection, which are essential attributes of the Unijet system.

The theory that lay behind our research was originally developed by researchers at Zurich University but had never previously been applied to a vehicle. This simple yet elegant theory is based on the assumption that if you continue to push diesel into a tank, the pressure inside will rise and the tank itself will become a hydraulic accumulator (or rail), i.e. a reserve of pressurised fuel ready for use.

Three years later, in 1990, the Unijet system developed by Magneti Marelli, Fiat Research Centre and Elasis on the common rail principle entered the pre-production stage. This stage was completed in 1994, when Fiat Auto started to look for a partner with superlative knowledge of diesel engine injection systems. The final stage of the project, i.e. completion of development and industrial production, was eventually entrusted to Robert Bosch.

In October 1997, eleven years after the Croma TDI, the market welcomed another record-breaking car: the Alfa 156 JTD. The new model was equipped with a revolutionary turbodiesel engine that was to deliver previously unimaginable results.

Vehicles equipped with this engine are incredibly noiseless with all the alacrity of a petrol power unit. They improve on the performance of a similar prechamber engine by an average of 12 percent and reduce fuel consumption by 15 percent.

The Alfa 156 equipped with a JTD engine won immediate acclaim and similar power units soon appeared on other Fiat Auto models and were adopted by many other motor manufacturers.

Now comes the second generation of JTD engines, the Multijet units. In fact, the 75th Paris Motor Show is the setting for the world premier of the 1.9 JTD 16v multiple injection fitted to our Alfa 156 and 147 models, the first engine of this type. And in 2003 it will be the turn of the small 1.3 JTD 16v Multijet unit.


TECHNICAL DATA

Type common rail Diesel DI
Number of cylinders 4, in line
capacity (cc) 1251
Bore x stroke (mm) 69.6 x 82.0
Cylinder head 4 valves
Timing system 2 overhead camshafts, fingertip rockers, chain drive
Crankcase cast iron with aluminium base
Injection systemcommon rail 1400 bar - Multijet
Turbochargerfixed geometry
EGR system electric EGR valve and heat exchanger
Power (Hp) at rpm 70 at 4000
Torque (Nm) at rpm 170 at 2000
Dimensions length x width x height (mm)460 x 500 x 650



1.3 JTD 16V MULTIJET